Product: Satin Shine  
 

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 
 

Satin Shine is a water-based rubber & vinyl protection.

Satin Shine gives a natural shine and luster to your rubber and vinyl finishes while protecting from the elements.

• gives tires, rubber and vinyl a shiny   finish
• water based
• long lasting shine














SPECIFICATIONS SHEET:


SECTION 2 - HAZARDOUS INGREDIENTS

HAZARDOUS COMPONENTS

% (by weight)

CAS #

EINECS #

Hazard Symbol

RISK PHRASES Full Text Section 16

No hazardous materials present as defined by OSHA -29 CFR 1910.1000; EPA - 40 CFR 260 - 281, 302, 355, 370, 372; DOT - 49 CFR 172; WHMIS or EC Directive 91 / 155 / EEC.

SECTION 3 - HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW Mild liquid, ingestion may cause gastric distress. Hazard Symbols - not classified. Risk phrases - none.

POTENTIAL HEALTH EFFECTS

INHALATION: None expected, however, certain individuals may experience minor nausea or headaches.

SKIN: None expected, however, prolonged contact may cause irritation.

EYES: Contact with eyes may cause irritation.

INGESTION: May cause gastric distress, vomiting and diarrhea.

CARCINOGENICITY No No NoIARC MONOGRAPHS? OSHA REGULATED?NTP?

SECTION 4 - FIRST AID MEASURES

INHALATION: Remove affected person to fresh air; if symptoms persist seek medical attention.

SKIN: Remove contaminated clothing; wash affected area with soap and water; launder contaminated clothing before reuse; if irritation persists, seek medical attention.

EYES: Check for and remove contact lenses. Flush eyes with clear running water for 15 minutes while holding eyelids open; if irritation persists, seek medical attention.

INGESTION: Give two glasses of water for dilution; DO NOT induce vomiting; never give anything by mouth to an unconscious person; seek medical attention.

SECTION 5 - FIRE FIGHTING MEASURES

GENERAL HAZARDS: Product is not considered flammable or combustible. Products of combustion include compounds of carbon, hydrogen and oxygen, including carbon monoxide.

EXTINGUISHING MEDIA Carbon dioxide, water, water fog, dry chemical, chemical foam.

FIRE FIGHTING PROCEDURES Keep containers cool with water spray to prevent container rupture due to steam buildup; floor will become slippery if material is released.

None UNUSUAL FIRE AND EXPLOSION HAZARDS

HAZARDOUS COMBUSTION PRODUCTS Smoke, fumes or vapors, oxides of carbon, oxides of silicone.

SECTION 6 - ACCIDENTAL RELEASE MEASURES

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Small spills - wash to sanitary sewer with plenty of water. Large spills - soak up with approved absorbent, shovel product into approved container for disposal. Wash area with plenty of water.

SECTION 7 - HANDLING AND STORAGE

PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE: Keep container closed when not in use; protect containers from abuse; protect from extreme temperatures.

SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION

HAZARDOUS COMPONENTS

NIOSH

ACGIH

TWA ppm

TWA mg/m3

STEL ppm

STEL mg/m3

TWA ppm

TWA mg/m3

STEL ppm

STEL mg/m3

No hazardous materials present as defined by OSHA -29 CFR 1910.1000; EPA - 40 CFR 260 - 281, 302, 355, 370, 372; DOT - 49 CFR 172; WHMIS or EC Directive 91 / 155 / EEC.

PERSONAL PROTECTION:

RESPIRATORY PROTECTION: None required; however, if misting occurs due to secondary operations such as mixing, spraying, sanding, buffing, etc, NIOSH approved respirator capable of removing particulate from air must be worn. Refer to 29 CFR 1910.134, ANSI Z88.2, or European Standard EN 149 for complete regulations.

PROTECTIVE GLOVES: Recommended for general protection

EYE PROTECTION: Safety glasses recommended for general protection Refer to 29 CFR 1910.133, ANSI 87.1, or European Standard EN166.

OTHER PROTECTIVE CLOTHING OR EQUIPMENT: Safety eyewash station nearby.

WORK / HYGIENIC PRACTICES: Practice safe workplace habits. Minimize body contact with this, as well as all chemicals in general.

SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES

Opaque white liquid, characteristic glue odor APPEARANCE AND ODOR

VAPOR PRESSURE 17 mm Hg @ 20° C

7.0 pH

0.970 SPECIFIC GRAVITY (WATER = 1)

212° F ( 100° C ) TCC BOILING POINT / BOILING RANGE

SOLUBILITY IN WATER Emulsifies

Non-flammable FLASH POINT

VISCOSITY Like that of water

LEL: Not applicable UEL: Not applicable FLAMMABLE LIMITS

< 1 VAPOR DENSITY (AIR = 1)

AUTOIGNITION TEMPERATURE Not determined

< 1 EVAPORATION RATE (WATER = 1)

SECTION 10 - STABILITY AND REACTIVITY

X STABILITY UNSTABLE: STABLE:

CONDITIONS TO AVOID: Extreme temperatures, keep from freezing.

INCOMPATIBILITY (MATERIALS TO AVOID): Strong oxidizers, strong acids.

HAZARDOUS DECOMPOSITION OR BYPRODUCTS: Decomposition will not occur if handled and stored properly. In case of a fire, oxides of carbon and silicone, hydrocarbons, fumes or vapors, and smoke may be produced.

XWILL NOT OCCUR: HAZARDOUS POLYMERIZATION MAY OCCUR:

CONDITIONS TO AVOID: None

SECTION 12 - ECOLOGICAL INFORMATION

No data are available on the adverse effects of this material on the environment. Neither COD nor BOD data are available. Based on the chemical composition of this product it is assumed that the mixture can be treated in an acclimatized biological waste treatment plant system in limited quantities. However, such treatment should be evaluated and approved for each specific biological system. None of the ingredients in this mixture are classified as a Marine Pollutant.

SECTION 13 - DISPOSAL CONSIDERATIONS

WASTE DISPOSAL METHOD: Dispose of in accordance with local, state, and federal regulations. Product is classified as non - hazardous, however, non-hazardous materials may become hazardous waste upon contact with other products. Refer to 40 CFR 260 - 299 for complete waste disposal regulations. Consult your local, state, or federal agency before disposing of any chemicals. According to the European Waste Catalogue, waste codes are application specific and should be assigned by the user based on the application for which the product is used.

SECTION 14 - TRANSPORT INFORMATION

PROPER SHIPPING NAME: DOT HAZARD CLASS / Packaging Group: REFERENCE: UN / NA IDENTIFICATION NUMBER: LABEL: HAZARD SYMBOLS: None Required None Hazard Identification Number (HIN): None UN TDG Class / Packaging Group: Not regulated None Not regulated Not regulated Not regulatedNot Applicable RID / ADR Dangerous Goods Code: IMDG HAZARD CLASS: IATA HAZARD CLASS / Packaging Group: Non - Hazardous for Transport Not regulated

Note: Transportation information provided is for reference only. Client is urged to consult 49 CFR 100 - 177, IMDG, IATA, EU, United Nations TDG, and WHMIS (Canada) TDG information manuals for detailed regulations and exceptions covering specific container sizes, packaging materials and methods of shipping.



 
 
  © Primer Solutions 2010 All Rights Reserved  
  021 854 3772  
 
 


WebDzine